Stainless steel incorporates into many applications, from cutlery to building structures. Different alloys make up the Grades Of Stainless Steel based on their metallurgical structure. High-grade stainless steel contains a minimum of 10.5% chromium that forms a protective oxide film, making it resistant to corrosion allowing for it to be labeled “Stainless Steel”. Lower alloy and carbon blends are more likely to rust even when painted or sealed with other organic coatings. The Grades Of Stainless Steel are broken down into four categories that use a three digit numbering system to denote their strength. The highest grades are reserved for the manufacturing of buildings and aircraft. Ranging from 200 to 600 the categories are determined by the ratio of other alloys added during the manufacturing of steel. The other alloys can either make steel more magnetic or more malleable depending on the what the steel is being used to construct.
Steel with strength numbering of 300 and higher are more heat resistant than lower grades. Stainless steel used for tableware, cooking and food processing are found in the 300 series of steel. This category referred to in the industry as 18-8, based on the percentage of 18% Chromium and 8% Nickel added to the composition. This steel is not magnetic and is stronger and has easier welding capabilities. Each category of steel is arranged by the percentage of Chromium and Nickel in the start of the process the lower the Chromium and Nickel the higher the grade.
There are also more alloys present in the metals composition like manganese. Regardless of the class used stainless steel flattened paper thin to form sinks, cutlery, or duct work for HVAC all maintain their strength and durability. Customers looking for all degrees of stainless steel products and their use for different applications. They offer a broad range of steel products in all grades to a myriad of industries. Their company can assist customers in selecting the right grade for the project, with three warehouses totaling 100,000 square feet of steel for any job. Delivery to job sites is also available, and they pride themselves on fast friendly on time service. Their knowledgeable staff is always available to assist customers no matter how big or small the project.
